Advertisement
INSTALLATION INSTRUCTIONS
1. Remove shipping materials, tape and protective film from
range. Remove oven racks and parts package from inside
oven.
2. Do not remove the shipping base at this time.
A. Shipping base
3. Use channel lock pliers to lower front leveling legs one-half
turn.
A
B
f
S"
S
C
A. Rear leveling leg
B. Front leveling leg
C. Channel lock pliers
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip
bracket to rear range foot.
Reconnect
the anti-tip bracket,
if the range is moved.
Faimure to follow these instructions can resumt in death
or serious burns to children
and adumts.
Contact a qualified floor covering installer for the best procedure
for drilling mounting holes through your type of floor covering.
Before moving range, slide range onto shipping base, cardboard
or hardboard.
1. Remove template from the anti-tip bracket kit (found inside
the oven cavity) or from the back of this manual.
2. Place template on the floor in cabinet opening so that the left
edge is against cabinet and top edge is against rear wall,
molding or cabinet.
3. Tape template into place.
4. If countertop
is not flush with cabinet opening edge, align
template with overhang.
If cabinet opening is wider than that specified in the "Location
Requirements"
section, adjust template so range will be
centered in cabinet opening.
Advertisement
