Advertisement
Mobile Home - Additional
Installation
Requirements
The installation of this range must conform to the Manufactured
Home Construction
and Safety Standard, Title 24 CFR, Part 3280
(formerly the Federal Standard for Mobile Home Construction
and Safety, Title 24, HUD Part 280). When such standard is not
applicable, use the Standard for Manufactured
Home
Installations, ANSI A225.1/NFPA 501A or follow local codes.
In Canada, the installation of this range must conform with the
current standards CAN/CSA-A240-1atest
edition, or with local
codes.
Mobile home installations require:
•
When this range is installed in a mobile home, it must be
secured to the floor during transit. Any method of securing
the range is adequate as long as it conforms to the standards
listed above.
Product Dimensions
Freestanding
Range
A. 27_"
(68.9 cm) depth with handle
B. 36" (91.4 cm) cooktop height
C. 46 _" (119.1 cm) overall height
D. 29_"
(75.9 cm) width
E. 25" (63.5 cm)
Installation Clearances
Cabinet opening dimensions shown are for 25" (64 cm)
countertop
depth, 24" (61 cm) base cabinet depth and
36" (91.4 cm) countertop height.
If the cabinet depth is greater than 24" (61 cm), oven frame must
extend beyond cabinet fronts by _/="(13 mm) minimum.
A
A. 18" (45.7 cm) upper side cabinet to countertop
B. 13" (33 cm) max. upper cabinet depth
C. 30" (76.2 cm) min. opening width
D. For minimum
clearance to top of cooktop, see NOTE*
E. 30 _" (76.5 cm) min. opening width
F This shaded area recommended
for installation of rigid gas pipe.
Flexible gas pipe and electrical outlet are recommended
in either
shaded area.
G. 8" (20.3 cm)
H. ! 7" (43.2 cm)
L 4½" (1!.4 cm)
J. 2" (5.1cm)
K. 2" (5.0 cm) min. clearance from both sides of range to side wall or
other combustible
material.
*NOTE: 24" (61 cm) minimum when bottom of wood or metal
cabinet is protected by not less than _/4"(0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an unprotected
wood or metal
cabinet.
If installing a hood above the range, follow the hood instructions
for dimensional clearances above the cooktop surface.
Advertisement
