Kenmore 66513014K111 Installation Instructions Manual page 17

Option 1, Countertop Attachment
1. Remove the brackets from the package and place in the
open slots on the left and right-hand top of the dishwasher
collar as shown.
2. Insert the bracket into the slot on the collar. Using a pair of
pliers, bend the tab down to secure the bracket in place.
Repeat this step for the other side.
NOTE: Do not attach the dishwasher. This will be done later.
Option 2, Side Attachment - For Dishwashers With
Stainless Steel Tubs
For marble, granite, or other hard surface countertops
1. Remove the brackets from the parts package.
2. Break off the end of the bracket along the scored line.
3,
With another person holding the rear of the dishwasher to
keep it from tipping, open dishwasher door and place towel
over pump assembly and spray arm of dishwasher. This will
keep screws from falling into pump area when you are
securing dishwasher to cabinet.
4. Push the plastic buttons out of the side of the tub.
NOTE: Save the buttons to cover the holes after dishwasher
is installed.
5°
Push bracket into slot on the side of dishwasher and bend
tab in toward the side of the dishwasher so that it keeps the
bracket in place.
NOTE: Do not attach the dishwasher. This will be done later.
.... 9
Bend tab- side mount
I I
"-...
Option 3, Side Attachment - For DishwashersWith Plastic
Tubs
For marble, granite, or other hard surface countertops
1. Remove the brackets from the parts package.
2° Push bracket into slot on the side of dishwasher and bend
tab in toward the side of the dishwasher so that it keeps the
bracket in place.
NOTE: Do not attach the dishwasher. This will be done later.
Bend tab- side mount
17