Advertisement
Available languages
Available languages
Powe r Co rd--Co n nect
remaining
wires
....
NOTE: Do not pre-twist stranded wire. Twist on wire connector.
Gently tug on wires to be sure both are secured.
Connect wires black to black and white to white, using UL
Listed/CSA
Approved
twist-on wire connectors.
Tighten
strain
relief
screws
to secure cord.
Place wires inside terminal
box. Insert tabs on left side of cover.
Make sure wires are tucked inside box. Close cover ensuring
wires are not pinched. Use 1/4" nut driver and previously
removed screw to secure cover.
NOTE:
Do not plug into outlet
until instructed
to do so.
15
Advertisement
