Part Identification Chart - Weider Pro Xt20 Weight Bench User Manual

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on page 14. Note: Some small parts may have
been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M10 Nylon Locknut (11)
M8 Nylon Locknut (9)
M10 Washer (6)
M6 x 64mm Screw (4)
M10 x 22mm Bolt (7)
10mm Spacer (20)
M6 Washer (30)
M8 Flat Washer (13)
M6 x 16mm Screw (3)
M10 x 180mm Bolt (22)
5
M10 x 45mm Bolt (38)
M8 x 58mm Bolt (16)
M10 x 58mm Carriage Bolt (8)
M10 x 65mm Bolt (23)
M10 x 68mm Bolt (39)