Important Safety Information; Electrical Safety; Protection From Fluids; Service Warnings - Halcro dm10 Owner's Manual

Important Safety Information

Electrical safety

IMPORTANT - This product must
always be
earthed vol age supply. t
Only suitable approved MAINS cords, as per
European individual country requirements in
the CE Low Voltage Directive Scheme, shall
be used with this unit.
WARNING:
cables longer
meters.
Do not use extension cords: To avoid safety
hazards, use only the power cord supplied
with your unit.
WARNING: Weighs 23 kg (50 lb)
per unit. Shipping weight is 36 kg
(79 lb). Never lift the amplifier by
yoursel . f
No naked flame sources, such as lighted
candles, should be placed on the unit.
The dm10 is designed to operate on any
mains supply in the range of 90 to 240 V,
50 to 60 Hz, without any internal or external
switches.
connected to an
do not use any
than three

Protection from fluids

This device is designed for indoor use only
and is not protected against liquids. It must not
be exposed to dripping or splashing, and no
objects filled with liquids, such as vases,
should be placed on it.

Service warnings

This product contains no user serviceable
parts.
All compartments are sealed at the factory. If
the seals are broken, the warranty will be void
and all service costs will be charged to the
owner.
DANGER: Contains no user
serviceable parts. Do not
attempt to open any of the
amplifier compartments, as
this may expose you to
dangerous voltages and will
void the warranty.
Requires F2AL 250 V fuse for continued
protection against the risk of fire. Never
bypass or use any other type of fuse. The fuse
is located on the rear panel in the main switch.
3