Important Safety Instructions - Halcro DM8 Owner's Manual

Preamplifier
Hide thumbs Also See for DM8:
Table of Contents

Advertisement

dm8

Important Safety Instructions

This product shall be connected to a MAINS socket outlet with a
protective earthing connection.
Only suitable approved MAINS cords, as per European
individual country requirements in the CE Low Voltage Directive
Scheme, shall be used with this unit.
Do not use extension cords: To avoid safety hazards, use only the
power cord supplied with your unit. We do not recommend that
extension cords be used with this unit.
Weighs 23 kg (50 lbs.) per unit. Shipping weight 36 kg (79 lbs)
Designed for indoor use only. The dm8 preamplifier is not
protected against liquids.
The unit shall not be exposed to dripping or splashing. No objects
filled with liquids, such as vases, shall be placed on the
apparatus.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Designed to operate on any mains supply in the range of 90V to
240 V. 50 to 60 Hz, without any internal or external switches.
There are no user serviceable components inside this unit. Do not
attempt to open the preamplifier compartment: this may expose
you to dangerous voltages and will void the warranty.
Compartments are sealed at the factory. If the seals are broken,
the warranty will be void and all service costs will be charged to
the owner.
Requires F 1A L 250v fuse for continued protection against the
risk of fire. Never bypass or use any other type of fuse. The fuse is
located on the rear panel in the main switch.
90 - 240 V
50 - 60 Hz
10A
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TM
Page 2 of 26

Advertisement

Table of Contents
loading

Table of Contents