Remote Control - Halcro dm10 Owner's Manual

Remote control

Figure 4
1. Volume buttons
2. Mute button
3. Standby/On button
4. Signal source buttons
5. Function button
1. Volume buttons: For volume control and
also used in conjunction with the function
button for various function selections.
2. Mute button: Press to mute sound to the
loudspeakers, press again to reactivate the
sound.
3. Standby/On button: Press to switch the
system between Standby and On.
4. Signal source buttons: Press to select any
one of six signal sources on the dm10.
5. Function button: Press to choose the
following functions: balance between the
speakers, in-phase and out-of-phase and
stereo/mono. See
instructions for full details.
Remote control batteries
To replace the batteries, remove the battery
cover from the rear of the remote control, and
insert the three supplied AAA batteries into the
unit (ensure that the polarity is correct). Refit
the battery cover.
If the remote control will not be used for a
period longer than one month, remove the
batteries.
15
relevant operating