Connecting To A Power Amplifier - Halcro dm10 Owner's Manual

Preamplifier with remote control
Hide thumbs Also See for dm10:
Table of Contents

Advertisement

Connecting to a power amplifier

Each dm10 has:
• two pairs of unbalanced current outputs
(use one pair for un-bridged power
amplifiers, use both for driving bridged
amplifiers)
• two pairs of unbalanced voltage outputs
• two pairs of balanced voltage outputs for
power amplifiers.
Select the method in which you wish to run
your power amplifiers, and connect the units
using high quality cables.
Outputs are color-coded:
• Positive +
right channel (red bezel)
• Negative - left channel (white bezel)
The dm10 will control power amplifiers from
balanced and unbalanced voltage sources, as
well as an unbalanced current source. The
dm10 will also control power amplifiers in
bridged
pair
configuration.
cables are required to run bridged power
amplifiers from the balanced Voltage Output
Remote power amplifier control
output
The dm10 has a remote power amplifier
control output (Fig 3,14), which will remotely
switch the Halcro amplifiers from Standby to
On. Cables can be purchased through Halcro
for details please E-mail us at:
service@halcro.com
17
Custom-made

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents