Halcro dm10 Owner's Manual page 15

1. and 2. Phono resistance and capacitance
selector: Allows the user to precisely match
the dm10 to the capacitance and resistance of
the phono cartridge.
3. Phono ground terminal:
phono unit is grounded
unbalanced inputs.
4. Phono gain switch: Allows the user to set
the phono input x1, x2 or x4 to match the
output of the cartridge.
5. Phono cartridge selector switch: Allows the
user to choose between a moving magnet or
moving coil cartridge.
6. Phono stage inputs: Allows the user to
connect the turntable to either the Balanced
or Unbalanced inputs.
7. Programmable inputs: Provides connection
to your signal sources. It does not matter
which input each source is connected to, as
these inputs are allocated using remote
control.
8. Program buttons: Allows the inputs to be
programmed by the remote control. They will
remain illuminated once they have been
allocated – see Connecting signal sources
page 16.
9. Tape monitor output: For recording direct
to tape.
10. Output sockets: Used to connect the
preamplifier to power amplifier(s).
11. Ground switch: If the dm10 is attached to a
power amplifier leave this switch on
Ensures your the unit is not attached to a power amplifier
when using and the user is using the headphones, switch
to Local.
12. Remote sensor window:
window is a sensor that receives infrared
signals from the remote control. Aim the
remote at this area and do not block or cover
this sensor window.
13. Main power switch, socket and fuse
holder:
programmed, the main power switch can be
left on and the dm10 left in Standby when not
in use. If the main power switch is turned off,
all programming is stored in memory.
14. Remote power amplifier control output:
Connect a cable from this output to the power
amplifier(s) and the dm10 will switch the power
amplifier(s) between Standby and On.
15. Output selector switch: Allows the user to
select the type of output required, Balanced,
Unbalanced or Current. see
on
page 16
Once the dm10
dm10 outputs
.
14
Remote
. If
Behind this
has been
on