Programmable Input Selections - Halcro dm10 Owner's Manual

Programmable input selections

The dm10 has seven available pairs of
programmable input connectors:
• three unbalanced voltage inputs
• three balanced voltage inputs
• one unbalanced current input.
Input
Modes
Balanced voltage input
Unbalanced voltage input
Unbalanced current input
All inputs that have a signal source connected
must be programmed by the remote control.
Any input can be programmed to connect any
source and each button on the remote
control can have only one signal source
programmed to it at any time.
The Phono input is pre-allocated to the phono
'source' and cannot be changed.
Required output source
impedance
XLR: Low source impedance
RCA: Low source impedance
RCA: Infinite source impedance
Input
Input impedance
socket
XLR 10 kohms +
10 kohms
RCA 10 kohms
RCA 50 ohms
19