Table of Contents
Advertisement
dm8
7. Volume control:
clockwise to increase the volume and
counter-clockwise
volume. To mute the system, when the
speakers are balanced, continue to turn
the knob counter-clockwise until the
word MUTE appears on the display, or
press the Mute button (Fig 1, 4)
Remote Control
Figure 2
Turn this knob
to
decrease
the
1. Volume buttons
2. Mute button
3. Standby/On button
1. Volume buttons: For
volume control and also
used in conjunction with
the function button for
various function selections.
2. Mute button: Press to
Mute the sound, press
again to reactivate the
sound.
3. Standby/On button:
Press to toggle the system
between Standby and On.
Note: Remote control takes 3 x AAA batteries (supplied)
8 Phase Button: Depressing this button
will toggle the unit between in-phase and
out-of-phase mode.
9 Remote sensor window: Behind this
window is a sensor that receives infrared
signals from the remote control. Aim the
remote at this area and do not block or
cover this sensor window.
4. Signal Source buttons
5. Function button
4. Signal source buttons:
Press to select any one of 5
signal sources on the dm8.
5. Function button: Press
to choose the following
functions: speaker balance,
in and out of phase and to
toggle the system between
stereo and mono. See
relevant operating
instructions for full details.
TM
Page 10 of 26
Advertisement
Table of Contents
