Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Advertisement
Table of Contents
Related Manuals for Havis DS-PAN-214
Summary of Contents for Havis DS-PAN-214
- Page 1 Supplement to Owner’s Manual Installation Instructions Havis Weatherproof Docking Station For Panasonic CF-19 Toughbook DS-PAN-214 & DS-PAN-214-2 www.havis.com 1-800-524-9900...
-
Page 2: Before Beginning
IP65 compliant DS-PAN-214 & DS-PAN-214-2 Docking Stations for the Panasonic CF-19 laptop computer. For questions regarding the set-up of your DS-PAN-214 or DS-PAN-214-2 Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information. -
Page 3: Parts Included
USB 2.0 Ethernet Speaker / Headphone Input (x2) (x3) (RJ45) Microphone Forward Facing Connectivity NOTE: A maximum of six (6) connections can be made on DS-PAN-214 & DS-PAN-214-2 Docking Stations Rearward Facing Connectivity (Part # DS-PAN-214-2 only) Antenna B Antenna A... -
Page 4: Installation & Cable Management
0.25”. Ensure the Foam Tape is positioned at the determined exit point from Cable Cover. Foam Tape C A U T I O N Use care operating scissors or knives while cutting objects Foam Tape Cable 0.25” Cross section view of Cable wrapped in Foam Tape www.havis.com • 1-800-524-9900... - Page 5 Installation & Cable Management (continued) 3). For each exiting cable, use a sharp knive or scissors to cut through the center of a rubber Grommet in order to insert the cable into Grommet hole. (Fig. A) DO NOT CUT GROMMETS FOR CABLE COVER EXITS WITHOUT EXITING CABLES. Instead, add a Grommet Plug and insert Grommet into the Cable Cover in the orientation shown.
- Page 6 Strain Relief Hole If you are routing Antenna cable(s) (Part # DS-PAN-214-2), use Push Pin Zip Ties supplied with the Docking Station Hardware Kit to secure the cable(s) to the Strain Relief Holes at the back of the Docking Station. Then route the cables to the cable bundle and secure as specified in the Owner’s Manual (Page 6, Step 5).
-
Page 7: Docking & Undocking
Docking & Undocking 1). Taking care to remove any excess moisture which may be present, remove Docking Connector Cover by unscrewing the two thumb screws. Use the Tether Loop if desired to attach Docking Connector Cover to a fixed object. (Tether not included) If Tether option is not used, store Docking Connector Cover in a safe, dry location. - Page 8 Havis, Inc. 75 Jacksonville Road, PO Box 2099 Warminster, PA 18974 47801 Anchor Court Plymouth, MI 48170 www.havis.com 1-800-524-9900 DS-PAN-214_OMN_10-11...