Related Manuals for Havis DS-PAN-421
Summary of Contents for Havis DS-PAN-421
- Page 1 Owner’s Manual Havis Rugged Mobile Docking Station For Panasonic CF-54 Toughbook DS-PAN-420 Series DS-PAN-421 DS-PAN-422 DS-PAN-423 PKG-DS-PAN-422 DS-PAN-421-2 DS-PAN-422-2 PKG-DS-PAN-422-2 www.havis.com 1-800-524-9900...
- Page 2 Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-PAN-420 Series Docking Station for the Panasonic CF-54 laptop computer. For questions regarding the set-up of your DS-PAN-420 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional...
-
Page 3: Table Of Contents
Bruce Jonik, Director of Engineering , Havis, Inc. FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modi cations to the model DS-PAN-42X not expressly approved by Havis, Inc. could void the user's authority to operate this equipment. -
Page 4: Parts Included
Docking Connector Docking Connector Locator Post Mounting Bracket (PN-0034-SM) Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion Devices as well as most competitors’ Hardware Kit (HWK-0036) This Hardware Kit includes: 1. Zip Ties (5) 2. Keys (2) 3. -
Page 5: Port Replication Capability
To expand your available USB & Ethernet peripheral requirements, there To expand your available USB & Ethernet peripheral requirements, there are provisions for mounting a Havis Rugged Communications Hub are provisions for mounting a Havis Rugged Communications Hub (part number DS-DA-602) directly to the DS-PAN-420 Series Docking Station. -
Page 6: Installation
Mounting Bracket to the Motion Device using (4) 1/4“-20 x 5/8” long screws (Hardware Kit Item 3). Torque screws to 80 in-lbs (9.0Nm) ± 10%. NOTE: Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion Devices as well as most competitors’... -
Page 7: Cable Management
Insert as many zip ties as necessary to secure cables. This loop must be large enough to allow full range of expected rotation and extension without Collect cables and secure stressing connections. to the mounting system. (Note: Mounting system not included) www.havis.com • 1-800-524-9900... -
Page 8: Operation - Docking
Operation - Docking DO NOT FORCE LAPTOP ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION. Ensure Docking Station is unlatched by positioning the Latch Handle to the “UNDOCK” position. With rear of computer elevated, load front of computer into Docking Station ensuring the computer’s handle extends under the Front Hooks. -
Page 9: Operation - Undocking
Operation - Docking (continued) For theft deterrence, secure computer by locking Docking Station with supplied key (Hardware Kit Item 2). supplied key (Hardware Kit Item 2). Docking Station will accommodate all Toughbook 54 models, providing access to bottom SmartCard reader while computer is secured in the Docking Station. -
Page 10: Optional Accessories
Optional Accessories DS-DA-602 - Rugged Communications Hub (For further Installation Instructions, refer to the Instructions included with DS-DA-602) Remove Strain Relief Bracket from Rugged Communications Hub, and retain fastener for reassembly. Identify the three (3) mounting points on the Rugged Communications Hub and the three(3) mounting points on the bottom of the Docking Station. - Page 11 Remove the two (2) 1/4”-20x3/8” screws from the Docking Station and insert them through the holes in the Mounting Bracket. Attach the Mounting Bracket and Lind Power Supply to the Docking Station with the two (2) 1/4”-20x3/8” screws. Torque screws to 80 in-lbs (9.0 Nm) ± 10%. www.havis.com • 1-800-524-9900...
- Page 12 Related Products Havis offers a wide variety of accessory products speci cally for use with the DS-PAN-420 Series Docking Station. For more information or to order, please visit www.havis.com. LPS-112 120W Power Supply External power supply and cable for Panasonic CF-54 Toughbooks with cigarette lighter adaptor.