Installation - Havis DS-PAN-211 Owner's Manual

Installation

1) Remove the Mounting Bracket from the Docking Station. Install the
Mounting Bracket to the Motion Device using (3) 1/4"-20 x 5/8" long
screws (Hardware Kit Item 3). Torque screws to 120 in-lbs (13.4Nm) ± 10%.
NOTE: Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion
Devices as well as most competitors'.
NOTE:
2) Lower the Docking Station to the Mounting Bracket as shown and secure
with (4) 1/4"-20 x 3/8" long screws (Hardware Kit Item 4). Torque screws
to 120 in-lbs (13.4 Nm) ± 10%.
NOTE: If mounting Power Supply to Docking Station, go to Page 10 before completing Step 2.
We recommend applying a drop of medium strength (blue)
thread locking adhesive to the threads of all fasteners.
www.havis.com • 1-800-524-9900
1/4"-20 Screws
Mounting Bracket
Typical Motion Device Example
(not included)
1/4"-20 Screws
with adhesive patch
(thread locking adhesive
not recommended)
5