Reconfiguring Your Storage System Disks - US Robotics USR8700 User Manual

To change this
The FTP settings
4. Click Apply.
5. When the confirmation message appears, click OK.
Note: If you changed the IP address of the storage system, you must now access the Web User
Interface using the new IP address.

Reconfiguring Your Storage System Disks

The Disks page displays information about all the hard disks that are currently installed in your storage
system:
This page includes the following details:
• The disk configuration (that is, whether the disks use a linear or RAID configuration, and the RAID
level)
Do this
If you need to use the storage system as an FTP server, select the Enable FTP
server check box.
If you do not need to use the storage system as an FTP server, clear this option.
For information about accessing the storage system using FTP, refer to
"Accessing the Storage System through FTP and SSH"
Serial ATA 4-Drive NAS
User Guide
on page 85.
Managing Your Storage System - 75