Starting Disksafe Express - US Robotics USR8700 User Manual

After you restart the computer, the Add License dialog box appears:
11. Type the key code for licensing the product and click OK.
The license key is on the back of the recovery CD envelope.
Note: If you previously used this key code on a different computer, an error message appears, and
you must re-activate your license. For more information, refer to
page 96.
If your computer has an Internet connection, the license is activated automatically. Click OK on the
confirmation message, and the Protect a Disk wizard starts. For information about this wizard, refer to
"Protecting Your Disks"
If your Internet connection is temporarily down, or if your computer doesn't have an Internet connec-
tion, click OK on the warning message. The Protect a Disk wizard still starts, but after 30 days you will
no longer be able to perform backups or recovery until you activate the license. For more information,
refer to "Activating Your license"

Starting DiskSafe Express

To start DiskSafe Express:
Windows Vista or XP: click Start > All Programs > USRobotics > DiskSafe Express.
Other Windows operating systems: click Start > Programs > USRobotics > DiskSafe Express.
If you did not protect a disk after installing DiskSafe Express and restarting your computer, you are
prompted to do so the first time you run this application. For information about this wizard, refer to
"Protecting Your Disks" on page 98.
on page 98.
on page 96.
Serial ATA 4-Drive NAS
User Guide
"Activating Your license"
Protecting Local Disks - 95
on