your disks (as described in
Caution: Reconfiguring your disks will delete all the data on your storage system.
Responding to RAID Degradation
When disk removal/failure causes RAID degradation, the Disk Change Notification page appears when
you access the Web User Interface or refresh the browser window:
Take the appropriate action:
To do this
Scan the storage system again and
update the information on the page
Re-install the same disk or install a
new disk
Return to the Web User Interface
and continue to operate in a
degraded mode
"Reconfiguring Your Storage System Disks"
Do this
Click Scan.
Click Shut Down.
After the storage system shuts down, install the disk and then restart the
system.
Note:
If you are re-installing multiple disks, be sure to re-install them in the
opposite order than you removed them.
Click Continue.
Serial ATA 4-Drive NAS
User Guide
on page 75).
Disk Configurations - 130