Accessing The Web User Interface Using The Storage System Console - US Robotics USR8700 User Manual

Accessing the Web User Interface Using the Storage System Console

If you want to access the Web User Interface using the Storage System Console, you must install the
Storage System Console on each computer from which you plan to manage the storage system. You can
install the Storage System Console on any computer that runs one of the following operating systems:
• Microsoft Windows Vista
• Microsoft Windows Server 2003
• Microsoft Windows XP
• Microsoft Windows 2000 Professional, Server, or Advanced Server with Service Pack 2 or newer
To install the Storage System Console, follow the instructions in
Console" on page 16.
Running the Storage System Console
Once you have installed the Storage System Console, you can run it and access the Web User Interface:
1. Start the Storage System Console as follows:
• Windows Vista or XP: click Start > All Programs > Storage System Console.
• Other Windows operating systems: click Start > Programs > Storage System Console.
As soon as you start the Storage System Console, it automatically scans the network for storage sys-
tem servers. This might take a few minutes. As soon as the scan is complete, the left pane displays a
tree view of all storage system servers discovered by the scan:
Note: If you connect a storage system to the network after the Storage System Console has
already scanned it, or if you change the IP address of the storage system, you must click
Discover Storage Systems to scan the network again and update the tree in the left pane.
Serial ATA 4-Drive NAS
"Step Three: Install the Storage System
Getting Started - 26
User Guide