Stopping A Backup Or Recovery In Progress - US Robotics USR8700 User Manual

1. Click Status.
2. In the Protected disk list, select the disk that you need to back up.
3. Click Back Up Now.
The Current activity area displays information about what's happening, the percentage of the backup
that has completed, and the speed at which the data is being sent over the network. The Progress bar
graphically indicates how much of the backup is complete.
To stop a backup in progress, click Stop Current Activity.

Stopping a Backup or Recovery in Progress

Once a backup or recovery starts, you can stop it at any time—for example, if you notice that your system
is not responding as quickly as you'd like, and you want to free up processing bandwidth for other tasks.
When you stop a backup in progress, that backup won't appear in the list of backups on the Restore page,
and any changed data that was not copied to the storage system will be copied during the next backup.
When you stop a recovery in progress, the local disk or partition is left in an incomplete state, and you must
recover it again later before you can use it.
To stop a backup or recovery in progress:
Serial ATA 4-Drive NAS
User Guide
Protecting Local Disks - 105