Connection Settings; Environment Requirements; Connection Method - E-Lins H980 Series User Manual

H980 Series 3G Router User Manual

3.2 Connection settings

3.2.1 Environment requirements

When you want to use H980 Series 3G Router , a computer and a UIM/SIM card should
be prepared according to the following requirements:
Computer with Ethernet card and TCP/IP protocol
1. IE8.0 or higher
2. Support 1024x768 resolution display

3.2.2 Connection method

For your convenient use, we recommend you plug your SIM/UIM card into H980 Series's
card slot before your configuration. Then power on H980 Series and begin your
configuration. Upon the actual conditions, connect and configure H980 Series 3G Router by
the following two methods:
Note:
You can configure H980 Series without any card, but you may not connect to the internet until you
insert a SIM/UIM card.
Warning:
Never pull or plug your SIM/UIM card when H980 Series is power on. Your card may be damaged.
Warning:
The metal casing of H980 Series 3G Router has to be well connected to the ground so as to ensure
the router a safe, stable and reliable operation.
3.2.2.1 Ethernet direct connection method
Using Ethernet cable with RJ-45 connector, directly connect the computer to one of LAN
ports on H980 Series 3G Router as shown in the figure below:
16