H980 Series 3G Router User Manual
circumstance to constitution Interface, Local Subnet, Peer Subnet, the
Encrypt Type, Authorization, the related parameter of Password etc., be you
usage static state ip address, Local ID and Peer ID don't fill.
3.3.7 Forward
When you click the "Forward" tab, the following sub-tabs appear on the page:
NAT & DMZ
Static Route
3.3.7.1 Nat & DMZ configuration
In the "Forward" main tab, click the "NAT&DMZ" sub-tab to set the route mode, NAT
and DMZ functions and go to the following configuration interface:
NAT&DMZ configuration parameters include:
【NAT/NAPT Services】 : Set whether enable NAT/NAPT function: Enable/Disable.
【DMZ Services】 : Set whether enable DMZ function: Enable/Disable.
Click the "Add" to go to the following configuration interface:
Fig. 3.3.7: Forward Tab
Fig. 3.3.7.1-1: NAT&DMZ Setting Interface
47