System Clock - E-Lins H980 Series User Manual

H980 Series 3G Router User Manual
【Show】: Display log in the Log Table.
【Clear】: Clear the log in the Log Table.
Log display:
【Log Table】: Display the system log information in the table.
3.3.8.2 System Log function
In the "System Tools" main tab, click the "System Log" sub-tab to set the log function
and go to the following configuration interface:
Fig. 3.3.8.2: System Log Management Interface
The system log configuration parameters include:
【Local Log Status】: Set whether enable local log function: Enable/Disable.
【Remote Log Status】: Set whether enable remote log function: Enable/Disable. After
this function is enabled, the router will send the log information to the configured
remote PC.
【Remote IP】: Set the IP address of the remote server, generally the IP address of the
PC that receives the log information.
【Remote Port】: Set the port number of the remote server.
Note:
For the success of remote log receive, the remote log server must be started.

3.3.8.3 System clock

In the "System Tools" main tab, click the "Clock" sub-tab to set the system's clock
function. Time Synch. Type option is the method to synchronize the system time: NTP
and Manual.
52