E-Lins H980 Series User Manual page 17

H980 Series 3G Router User Manual
Note: H980 Series 3G Router's LAN port is designed with self-adaptive cross connect
technology, so the straight-through cable or cross cable can be both applied to connect
devices for communication.
3.2.2.2 LAN connection method
When it is required to connect H980 Series 3G Router to local network through HUB or
switch, connect the hub or switch out-link port with any one of its switch ports as shown
in the figure below.
3.2.2.3 Port connect
RJ-45 – Ethernet Interface
Self-adapting (Version 2.0 or above) standard 10/100BaseT Ethernet
switching interface
ANT – antenna interface
The standard 5OΩ/SMA radio-frequency connector (negative terminal) is
adopted for use. In addition, the lightning-proof measures need to be
Fig. 3.2.2.1: Wiring Method 1
Fig. 3.2.2.2: Wiring Method 2
17