E-Lins H980 Series User Manual page 48

H980 Series 3G Router User Manual
【Select】: Select which data forward rule to be added.
1. Route mode setting
Select the "Route Mode" option to go to the following configuration interface:
Route Mode configuration parameters include:
【Interface】:On selected interface, the source IP of packets pass through H980 Series
would not be replaced to H980 Series's IP, the destination machine can see the source
IP directly.
Note:
Normally you may not need this option except for some certain application.
2. DMZ setting
Select the "DMZ" option to go to the following configuration interface:
Fig. 3.3.7.1-2: NAT&DMZ Setting Interface
Fig. 3.3.7.1-3: NAT&DMZ Setting Interface
48