E-Lins H980 Series User Manual
  1. Manuals
  2. Brands
  3. E-Lins Manuals
  4. Network Router
  5. H980 Series
  6. User manual

E-Lins H980 Series User Manual

3g router industrial-grade
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
H980 Series 3G Router

User Manual

Industrial‐grade   
 
 
 
 
 
 
RF Module built‐in 
 
E-Lins Technology Co., Ltd
ADDRESS: 1007A, MinTai Bld., Minkang Road, Minzhi Street, Bao'an District,
ShenZhen, 518000, China
PHONE: +86 (755) 33231620
WEB:
http://www.szelins.com

Advertisement

Table of Contents
loading

Related Manuals for E-Lins H980 Series

Summary of Contents for E-Lins H980 Series

  • Page 1: User Manual

    H980 Series 3G Router User Manual Industrial‐grade                RF Module built‐in    E-Lins Technology Co., Ltd ADDRESS: 1007A, MinTai Bld., Minkang Road, Minzhi Street, Bao'an District, ShenZhen, 518000, China PHONE: +86 (755) 33231620 WEB: http://www.szelins.com...
  • Page 2 Manual Declaration Copyright All information in this user manual is protected by copyright law. Whereby, no organization or individual shall copy or reproduce the whole or part of this user manual by any means without written authorization from E-Lins Technology Co.,Limited.

  • Page 3: Table Of Contents

    H980 Series 3G Router User Manual CONTENTS CHAPTER 1 ABOUT THIS MANUAL ..............4 Purpose....................4 Applicable scope..................4 Version information................4 Convention ....................5 Technical support...................5 Acronym and term .................6 CHAPTER 2 Product Introduction ..............9 2.1 3G overview ....................9 2.1.1 Product appearance ................9 2.1.2 Other Accessories................11 2.1.3 Device installation .................11...

  • Page 4: Chapter 1 About This Manual

    Convention Technical support Acronyms and terms 1.1 Purpose This user manual is developed mainly on the basis of H980 Series V1.0, and is ® used as the guideline while E-Lins H980 Series series products are installed and tested.

  • Page 5: Convention

    H980 Series 3G Router User Manual 1.4 Convention For reading and using this user manual fast and conveniently, the following conventions are reached for some abbreviations, icons, notes, security warnings and tips that appear in this user manual: Table -1.2: Convention Table...

  • Page 6: Acronym And Term

    H980 Series 3G Router User Manual 1.6 Acronym and term In this user manual, the following acronyms and terms are used: Access Point Name Application Asynchronous Transfer Mode Auto Table Machine Authentication Centre Border Gateway Border Gateway Protocol Base Station Controller...
  • Page 7 H980 Series 3G Router User Manual Home Location Register HSCSD High Speed Circuit Switch Data IGMP Internet Group Management Protocol IGRP Internet Gateway Routing Protocol Intelligent Network Internet Protocol IPv4 IP version 4 IPv6 IP version 6 IPSEC IP Secure Protocol...
  • Page 8 H980 Series 3G Router User Manual Quality of Service Routing Area RADIUS Remote Authentication Dial In User Service Routing Information Protocol Register Service Center RTOS Real Time Operating System Real-time Transport Protocol Remote Terminal Unit RSVP Resource reSerVation Protocol SCADA...

  • Page 9: Chapter 2 Product Introduction

    3G product upon the needs of users. It can provide data communication service for these users at any time and in any place. H980 Series 3G Router is characterized with excellent transmission reliability and a wide range of applicability. It is the ideal choice for various sectors as a special data communication system.
  • Page 10 Indicate the status of module. SYSTEM: It lights when router works normally. Back panel interface H980 Series 3G Router’s all interfaces are designed on the back panel as shown below: 3G ANT WAN CONSOLE USB POWER Wi-Fi ANT Fig. 2.1.1-2: Back Panel...

  • Page 11: Other Accessories

    Storage Temperature: -40~+80ºC Relative Humidity: <95% (no condensation) H980 Series 3G Router can be placed in office, on wall or installed or fixed in any places, without special wiring and heat radiating requirements. To ensure the long-term and stable operation of system, grounding measures and dust-proof measures should be taken on power supply, keep ventilation and a proper room temperature.

  • Page 12: Function And Features

    RJ-45 - Ethernet interface Standard 10/100BaseT Ethernet switch port, self-adaptive DC - power supply interface, H980 Series 3G router’s power supply is generally +12VDC ANT - antenna interface The standard 5OΩ/SMA RF connector (female) is applied. In the environment of some industrial applications, the lightning protection measures should be taken.

  • Page 13: System Application

    Local Firmware Upgrading/ Configuration Backup System Log Server 2.3 System application Multiple application modes for H980 Series 3G Router are described as follows: Application Mode One: Application in video monitoring The center-to-multipoint network generally needs to be adopted for the application mode of video monitoring.
  • Page 14 SOHO Application Mode Three: Application in banking business H980 Series 3G Router is able to be connected to the target machine and other network devices at the same time. Take ATM network in the banking business for example. ATM machine needs to be connected to the host computer of bank, and at the same time, it is also connected to the video camera, and thereby monitoring the conditions around ATM machine.

  • Page 15: Chapter 3 Router Configuration

    Before using H980 Series 3G Router, users should configure relate parameters; during using, you can freely change related parameters and perform software upgrade and simple test etc. When you enter H980 Series 3G Router built-in WEB configuration interface, you can set and manage its parameters as described below.

  • Page 16: Connection Settings

    Never pull or plug your SIM/UIM card when H980 Series is power on. Your card may be damaged. Warning: The metal casing of H980 Series 3G Router has to be well connected to the ground so as to ensure the router a safe, stable and reliable operation.
  • Page 17 3.2.2.2 LAN connection method When it is required to connect H980 Series 3G Router to local network through HUB or switch, connect the hub or switch out-link port with any one of its switch ports as shown in the figure below.

  • Page 18: Network Configuration

    H980 Series 3G Router User Manual adopted for some operating conditions, so you may place a lightning protection device between the connector and the antenna. Attention: The products shall be far away from any heating device; Don’t place the products in the dusty or wet environment;...
  • Page 19 H980 Series 3G Router User Manual Fig. 3.2.3-2: Computer Local Connection Configuration Select the “Internet Protocol (TCP/IP)”, click the “Properties”, and enter the interface as below:...
  • Page 20 Management interface login IP address: 192.168.8.1 Login name: admin Login password: admin Method 2: advanced configuration If you don’t want to interrupt local PC LAN communication and configure H980 Series 3G Router when the former network configuration exists, it is required add route (IP).
  • Page 21 H980 Series 3G Router User Manual The configuration operation is shown as below: Click the “Advanced (V)…”button in Fig. 3.2-5 to enter the interface as below: Fig. 3.2.3-4: Advanced TCP/IP Properties Configuration Click the “Add (A)”button under the “IP address (R)”, and fill in the IP address that you want to add: Fig.

  • Page 22: System Login

    Internet is accessed through original local network, the default gateway setting does not need to be modified; if H980 Series 3G Router + is used, you need to modify the default gateway and configure it as H980 Series 3G Router’s default LAN IP address 192.168.8.1.

  • Page 23: Web-Based Configuration

    Input correct user name and password, and enter the WEB configuration interface. 3.3 WEB-based configuration H980 Series 3G Routers can be configured in WEB mode. The WEB-based operation features visualization and simplicity, so it is recommended to perform parameter configuration and operation in WEB mode. Connect the PC and router according to the description in the previous section.

  • Page 24: Internet

    H980 Series 3G Router User Manual Drawing 3.3.1-1: System Configuration Window You can select the function and display the configuration window for the function after clicking on the related option on the top left corner of configuration window. Please see the following drawing: Menu Descriptions Drawing 3.3.1-2: Main Option Bar...
  • Page 25 H980 Series 3G Router User Manual When you click the “Internet” tab, the following sub-tabs appear on the page: Mobile Network(Embedded Modem) Internet Connection Type Fig. 3.3.2: Internet Configuration Tab 3.3.2.1 Mobile Network configuration In the “Internet” main tab, click the “Mobile Network (Embedded Modem)” sub-tab to set the modem parameters and go to the following configuration interface: Fig.
  • Page 26 H980 Series 3G Router User Manual Note: “Embedded Modem” & “Module Modem” both mean the Modem embedded in H980 Series. In the “Advanced setting” tab, it contains “PPP Advanced Settings” & “Internet Connection Type Settings”, the interface of “PPP Advanced Settings” is as below:...
  • Page 27 H980 Series 3G Router User Manual Fig. 3.3.2.1-2: PPP Advanced Settings 【The Net Type of Module】DEFAULT means router will obey default option to choose network; AUTO means router will choose available network automatically; other options mean router will use certain network only.

  • Page 28: Wan Port Configuration

    H980 Series 3G Router User Manual 【LCP Echo Interval】: Set LCP’s maximum interval time, in second. 【LCP Echo Failure】: Set LCP’s maximum request times. 【MTU】: Set the number of bytes of the maximum transfer unit. 【MRU】: Set the number of bytes of the maximum receive unit.

  • Page 29: Dhcp Configuration

    H980 Series 3G Router User Manual 【Secondary DNS】: set the first backup DNS server’s address, which can be empty. 2. DHCP configuration When select “Automatic Configuration—DHCP”, enter the following configuration interface: Fig. 3.3-5: DHCP configuration interface Basically this do not need configuration, router will get IP address by DHCP service.
  • Page 30 H980 Series 3G Router User Manual 【Password】: set the password of PPPoE service provided by ISP. 【Service Name】: set the service name of PPPoE service provided by ISP. 【Advanced Setting】: configure advanced parameters of dialing protocol. 3.3.2.3 Internet Connection Type configuration In the “Internet”...
  • Page 31 H980 Series 3G Router User Manual Fig. 3.3.2.2: Modem configuration Interface 【DNS Customize】: Set whether configure the DNS server address manually: Enable/Disable. 【DNS1】: Set IP address of the primary DNS server. 【DNS2】: Set IP address of the standby DNS server.

  • Page 32: Local Network

    H980 Series 3G Router User Manual 3.3.3 Local network When you click the “Local Network” tab, the following sub-tabs appear on the page: WIFI Basic WIFI Security DHCP Server Static DHCP Fig. 3.3.3: Local Network Configuration Interface 3.3.3.1 LAN configuration In the “Local Network”...
  • Page 33 H980 Series 3G Router User Manual Fig. 3.3.3.2: Wireless configuration interface 【Wireless Status】: set whether wireless network function is enabled. 【Wireless Mode】: Right now could only work as a AP. 【Wireless Network Mode】: set which protocols will be use, Could select only use 802.11b or 802.11g.

  • Page 34: Dhcp Server Configuration

    H980 Series 3G Router User Manual 【WEP Shared Key】: set the keyword of WIFI. 3.3.3.4 DHCP server configuration In the “Local Network” main tab, click the “DHCP Server” sub-tab to set the DHCP server parameters and go to the following configuration interface: Fig.

  • Page 35: Applications

    H980 Series 3G Router User Manual Fig. 3.3.3.3-1: DHCP Configuration Interface The configuration parameters include: 【Add】: Map the DHCP client’s MAC address with IP. 【Del】: Delete or release the mapping of MAC and IP. 【Refresh】: Refresh the information on the page.

  • Page 36: Ddns Configuration

    H980 Series 3G Router User Manual Fig. 3.3.4: Applications Configuration Tab 3.3.4.1 DDNS configuration The router is designed with DDNS (Dynamic Domain System) function which can make others to search the dynamic IP address by internet domain. In the “Application” main tab, click the “DDNS” sub-tab to set DDNS parameters and go to the following configuration interface: Fig.
  • Page 37 H980 Series 3G Router User Manual Fig. 3.3.4.2-1: Time Operation Interface The configuration parameters include: 【Add】: Add the Timing Operation operated at certain time. 【Refresh】: Refresh the information on the page. 【Edit】: Edit selected Timing Operation. 【Del】: Delete Timing Operation.
  • Page 38 H980 Series 3G Router User Manual 【Set Time】: We have five types of time: minute, hour, day, month and week. All you need processing the time is to fill each type with valid value. When setting, for each type of time, you need to split the different value with ",", and you can use "xx-xx" to represent a period of time.
  • Page 39 H980 Series 3G Router User Manual Fig. 3.3.4.5: Interface Check 【Interface Inspecting】: Set whether enable the Interface Inspecting. 【Interface Name】: Set which interface will be check. 【Flow Direction】: the way to check data flow. 【Inspect Interval Time】: Set the interval of check.
  • Page 40 H980 Series 3G Router User Manual Fig. 3.3.5-1: Security Setting Interface The configuration parameters include: 【Firewall Service】: Set whether enable firewall function: Enable/Disable. 【Default Action】: Set the default action of the firewall: “Accept” means the router accepts other packets by default; “Drop” means the router drops other packets by default.
  • Page 41 H980 Series 3G Router User Manual You can choose filter type here: IP filter rules or MAC filter rules. Select the “IP Filter” to go to the following configuration interface: Fig. 3.3.5-3: Firewall Setting Interface The configuration parameters include: 【ID】: Set the identification of the firewall rule, generally using a name with meanings.

  • Page 42: Vpn

    H980 Series 3G Router User Manual Fig. 3.3.5-4: Firewall Setting Interface 【MAC Address】: Set the MAC address. 【Action】: Select the actions to this rule of the firewall: Accept, Drop, Reject. 【Status】: Set whether enable this filter rule: Enable/Disable. 3.3.6 VPN...
  • Page 43 H980 Series 3G Router User Manual Fig. 3.3.6.1-2: L2TP Setting Interface L2TP configuration parameters include: 【Name】: Set a name for this L2TP connect. 【Status】: Set whether enable this L2TP: Enable/Disable. 【Server IP or Domain】: Input Server IP or Domain of the VPN service provider.
  • Page 44 H980 Series 3G Router User Manual 【View】: View the status of PPTP, including Received Packets (TX), Received Errors Packets, Received Drops Packets, Received Bytes (RX), Send Packets (STX), Send Errors Packets, Send Drops Packet, and Send Bytes (SRX). 【VPN Route Type】: Link to the sub-page: Internet Connection Type.

  • Page 45: Gre Configuration

    H980 Series 3G Router User Manual 3.3.6.3 GRE configuration Fig. 3.3.6.3-1: GRE Setting Interface 【Edit】: Edit the PPTP setting. 【Del】: Delete the PPTP setting. 【View】: View the status of PPTP, including Received Packets (TX), Received Errors Packets, Received Drops Packets, Received Bytes (RX), Send Packets (STX), Send Errors Packets, Send Drops Packet, and Send Bytes (SRX).

  • Page 46: Ipsec Configuration

    H980 Series 3G Router User Manual 3.3.6.4 IPsec configuration Fig. 3.3.6.4-1: IPsec Setting Interface 【Edit】: Edit the PPTP setting. 【Del】: Delete the PPTP setting. 【View】: View the status of PPTP, including Received Packets (TX), Received Errors Packets, Received Drops Packets, Received Bytes (RX), Send Packets (STX), Send Errors Packets, Send Drops Packet, and Send Bytes (SRX).

  • Page 47: Forward

    H980 Series 3G Router User Manual circumstance to constitution Interface, Local Subnet, Peer Subnet, the Encrypt Type, Authorization, the related parameter of Password etc., be you usage static state ip address, Local ID and Peer ID don't fill. 3.3.7 Forward When you click the “Forward”...
  • Page 48 Fig. 3.3.7.1-3: NAT&DMZ Setting Interface Route Mode configuration parameters include: 【Interface】:On selected interface, the source IP of packets pass through H980 Series would not be replaced to H980 Series’s IP, the destination machine can see the source IP directly. Note: Normally you may not need this option except for some certain application.
  • Page 49 H980 Series 3G Router User Manual Fig. 3.3.7.1-4: DMZ Setting Interface DMZ configuration parameters include: 【Outside Interface】 : Set the interface on which the DMZ function acts. 【Inside Address】 : Set the IP address of the host assigned by DMZ record.

  • Page 50: Static Route Configuration

    H980 Series 3G Router User Manual 3.3.7.2 Static route configuration In the “Forward” main tab, click the “Static Route” sub-tab to set the static route parameters and go to the following configuration interface: Fig. 3.3.7.2-1: Static Route Configuration Interface The configuration parameters include: 【View Route Table】: View the current system’s route table.

  • Page 51: System Tools

    H980 Series 3G Router User Manual 【Gateway】 : Configure the next IP address of this static route, namely the port address of the neighboring router. 【Interface】: Specify the interface on which the static route acts. 3.3.8 System tools When you click the “System Tools” tab, the following sub-tabs appear on the page:...

  • Page 52: System Clock

    H980 Series 3G Router User Manual 【Show】: Display log in the Log Table. 【Clear】: Clear the log in the Log Table. Log display: 【Log Table】: Display the system log information in the table. 3.3.8.2 System Log function In the “System Tools” main tab, click the “System Log” sub-tab to set the log function and go to the following configuration interface: Fig.
  • Page 53 H980 Series 3G Router User Manual Select the Manual to set the time manually. Select the NTP to go to the following configuration interface: Fig. 3.3.8.3: Clock Configuration Interface The system clock configuration parameters include: 【NTP Server IP】: Set the domain or IP address of the NTP server.
  • Page 54 H980 Series 3G Router User Manual 3.3.8.5 Backup In the “System Tools” main tab, click the “Backup” sub-tab to set the backup function. The configuration interface consists of two parts: the first part is parameters backup, namely send the parameters configuration information from the router to PC; the second part is parameters restoration, namely send the parameters configuration information from PC to the router.

  • Page 55: Firmware Upgrade

    H980 Series 3G Router User Manual 【Restore】: Import the parameters. 【Cancel】: Cancel the information in the address input box. 3.3.8.6 Firmware upgrade In the “System Tools” main tab, click the “Firmware Upgrade” sub-tab to use the software upgrade function and go to the following interface: Fig.

  • Page 56: Status Display

    H980 Series 3G Router User Manual 【Reboot】: Reboot the system. After reboot the router, please reboot the browser. 3.3.9 Status display When you click the “Status” tab, the following sub-tabs appear on the page: Base Information Embedded Modem Route Table DHCP Client Fig.

  • Page 57: Chapter 4 Frequently Asked Questions (Faq)

    Fault 1: All indicators are off. Check whether the cables are connected correctly. Meanwhile, check whether the power supply complies with the requirements. H980 Series 3G Router’s label indicates the detailed requirements regarding the power supply voltage. Check whether the power supply voltage is identical with that specified in the label.
  • Page 58 H980 Series 3G Router User Manual C:\>ipconfig Windows IP Configuration Ethernet adapter local connection: Connection-specific DNS Suffix..: IP Address ....: 192.168.8.48 Subnet Mask .

  • Page 59: Appendix: Software Upgrade Description

    H980 Series 3G Router User Manual Appendix: Software Upgrade Description Upgrade tool description and operating instructions H980 Series 3G Router is designed with the platform technology, whose software can be upgraded with the development of the communication and network technology. WEB upgrade: H980 Series 3G Router supports the function of upgrading the firmware directly by importing the upgrade file via the WEB configuration interface.

Table of Contents