Table of Contents
Advertisement
H980 Series 3G Router User Manual
2. This product is a Class-A information product, which may cause radio interference
in living environment when being used. In this case, the users are required to take
some proper measures.
2.1.3.2 Wiring
RJ-45 - Ethernet interface
Standard 10/100BaseT Ethernet switch port, self-adaptive
DC - power supply interface, H980 Series 3G router's power supply is generally +12VDC
ANT - antenna interface
The standard 5OΩ/SMA RF connector (female) is applied. In the environment of some
industrial applications, the lightning protection measures should be taken. You can
install the lightning protection device between this connector and antenna.
Note:
1.
Keep this product away from any heating source;
2.
Don't place this product in dusty or humid environment;
3.
Keep it away from some possible interference sources such as metal wall,
microwave oven etc;
4.
To ensure that Wi-Fi network signal is received well, please pay attention to the
position and the angle of antenna. Don't place antenna inside the shielded metal
case.
2.2 Function and features
H980 series 3G mobile data communication terminal product features platform and
modularization design. Upon the different demand from the users, the platform
extension, modem combination and clipping are carried out to comply with various
application demands of different clients. Combination of Broadcom hardware platform
with Linux-based software platform is its core advantage.
The features of full-function 3G mobile data communication terminal product include:
2.2.1 Hardware function
SYSTEM, WLAN, WAN, LAN, RF, NET, SIGNAL indicators
Factory default configuration restoration button
Antenna interface: 50Ω/SMA negative end
Ethernet interface: one 10/100BaseT/RJ45 self-adapting
Configuration interface: WEB
2.2.2 Software function
Supporting HSUPA/HSDPA/EDGE/GPRS or EVDO/CDMA 1x
Built-in DHCP Service
12
Advertisement
Table of Contents
