E-Lins H980 Series User Manual page 49

H980 Series 3G Router User Manual
Fig. 3.3.7.1-4: DMZ Setting Interface
DMZ configuration parameters include:
【Outside Interface】 : Set the interface on which the DMZ function acts.
【Inside Address】 : Set the IP address of the host assigned by DMZ record.
3. NAT setting
To configure the NAT function, you need to go to the following configuration interface:
Fig. 3.3.7.1-5: NAT Setting Interface
NAT configuration parameters include:
【Name】: Set the name mapped by NAT port.
【Protocol】: Set the protocol mapped by NAT port.
【Outside Interface】: Select the interface on which NAT function acts.
【Outside Port】: Set the outside port number mapped by NAT port.
【Inside Address】: Set the IP address of LAN host mapped by NAT port.
【Inside Port】: Set the port number of LAN host mapped by NAT port.
49