Chapter 3 Router Configuration; Overview; Connection Settings; Environment Requirements - E-Lins H900 Series User Manual

Chapter 3 Router Configuration

3.1 Overview

E-Lins H900 Cellular Router features built-in WEB interface configuration, management
and debugging tools. Before using E-Lins H900 Cellular Router, users should configure
relate parameters; during using, you can freely change related parameters and perform
software upgrade and simple test etc.
When you enter E-Lins H900 Cellular Router built-in WEB configuration interface, you
can set and manage its parameters as described below.

3.2 Connection settings

3.2.1 Environment requirements

When you want to use E-Lins H900 Cellular Router, a computer and a UIM/SIM card
should be prepared according to the following requirements:
Computer with Ethernet card and TCP/IP protocol
1. IE6.0 or higher
2. Support 1024x768 resolution display

3.2.2 Connection method

For your convenient use, we recommend you plug your SIM/UIM card into H900's card slot
before your configuration. Then power on H900 and begin your configuration. Upon the
actual conditions, connect and configure E-Lins H900 Cellular Router by the following two
methods:
Not e:
You can configure H900 without any sim card, but you may not connect to the internet until you
inse rt a SIM/UIM card.
Wa rning:
Nev er pull or plug your SIM/UIM card when H900 is power on. Your card may be damaged.
H900 Series Cellular Router User Manual