E-Lins H980 Series User Manual page 10

H980 Series 3G Router User Manual
The indicators on the front panel are described as the table below:
Indicator
LAN:
NET:
SYSTEM:
Back panel interface
H980 Series 3G Router's all interfaces are designed on the back panel as shown below:
3G ANT DEF
The interfaces on the back panel are described as below:
3G ANT: Antenna (SMA negative terminal) interface, which is able to match with
standard short antenna, vehicular antenna or directional antenna;
DEF: Reset button used for restoring the default parameters.
LAN:10/100BaseT self-adapting Ethernet interface;
WAN: used to connect wired network like ADSL modem.
CONSOLE: Serial interface used for repair the device.
USB: used for write ESN and other info into the router so it could support NON-RUIM.
POWER: DC power supply interface. (Be sure to check if the voltage of power supply is
consistent with the label on the router)
WIFI ANT: Antenna (SMA negative terminal) interface, which is able to match with
standard short antenna, vehicular antenna or directional antenna;
State Description
It lights shows there is a LAN connect, flash shows
it has data communication.
Indicate the status of module.
It lights when router works normally.
LAN WAN CONSOLE USB POWER Wi-Fi ANT
Fig. 2.1.1-2: Back Panel
10