Getting Started
1
ID
Name
1
DVI In
2
RS-232
4
Line In
5
USB
4
Line Out
6
LAN
7
IR Out
8
5V DC
Back
2
3
4
Description
Connect the included DVI cable from this
connector to the DVI source.
Connect the included RS-232 cable from this
port to an RS-232 device.
See
Using RS-232
Connect a 3.5mm mini-stereo cable from the
Line Out jack on the multimedia PC to this
jack.
Connect a USB cable from the computer to
this USB port.
Connect a 3.5mm mini-stereo cable from this
jack to the Line In jack of a multimedia PC.
Connects the Sender unit to the network
(or directly to the Receiver unit) using an
Ethernet cable.
Connect an IR Blaster cable (Gefen part no.
EXT-2IREMIT) from this jack to the Hi-Def
source to control the source from the viewing
location.
Connect the included 5V DC locking power
supply to this power receptacle.
page | 3
Sender Unit Layout
5
6
7
for details.
8