Table of Contents
Advertisement
Getting Started
1
ID
Name
1
PAL / NTSC
2
Under Scan / Over Scan
3
HDMI In
4
USB
5
5V DC
6
Power
Back
2
3
page | 3
4
Description
Switches between NTSC and PAL output.
Make sure that you use the proper output for
the television. Using the wrong format will
result in a unrecognizable picture and may
damage your television. See
Modes
for details.
Switches between underscan and overscan
modes. See
Underscan and Overscan
Modes
for more information.
Connect an HDMI cable from the Hi-Def
source to this connector.
Used to upgrade the firmware. See
Firmware Upgrade Procedure
on upgrading the firmware.
Connect the included 5V DC power supply to
this power receptacle.
This LED indicator will glow bright blue when
the power supply is connected between the
unit and an available electrical outlet.
Panel Layout
6
5
NTSC and PAL
for information
Advertisement
Table of Contents
