Take Single Wavelength Measurements (Single Reading); Take Single Wavelength Measurements (Continuous Readings) - Hach DR 5000 User Manual

Spectrophotometer
Hide thumbs Also See for DR 5000:
Table of Contents

Advertisement

6.4.2 Take single wavelength measurements (single reading)

6.4.3 Take single wavelength measurements (continuous readings)

Reading mode:
1. To highlight the required mode, start by pressing Reading
mode.
2. Select the required mode, then press OK, then Return to return
to the result display.
1. Insert the blank cuvette/cell into the cuvette/sample cell holder.
Press Zero.
Note: The Read key is only active after the zero measurement has
been completed.
2. Insert the sample cuvette/cell into the cuvette/sample cell
holder. Press Read.
3. For data storage, see
1. Insert the blank cuvette/cell into the cuvette/sample cell holder.
Press Zero.
Note: In the reading mode "Continuous" only the Zero key is shown to
start the reading. The reading sequence is started automatically.
2. Insert the sample cuvette/cell into the cuvette/sample cell
holder.
3. Press Options and then the Store icon to store the displayed
data in the Data Log.
Note: For data storage, see
Advanced Operations
section 5.3.2 on page
38.
section 5.3.2 on page
38.
89

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents