Hach DR 5000 User Manual page 88

Spectrophotometer
Hide thumbs Also See for DR 5000:
Table of Contents

Advertisement

Advanced Operations
Options
Reading Mode
Save as User Program
Recall Data
Instrument Setup
88
Table 12 Single wavelength setup options (continued)
Description
Single Reading Mode: A reading is only displayed after a measurement has been carried out
(press Read; standard setting) (see
Continuous Reading Mode: After the zero measurement, all readings are displayed
automatically and continuously (see
To store the selected parameters as a User Program, see
Call up saved measurement data, wavelength scans or time courses, see
page
35.
Basic data of the instrument, see
Concentration factor:
1. Press Concentration Factor: Off in the Options menu. Press
2. Press the "Factor" key and use the alphanumeric keypad to
3. Press OK to confirm.
Concentration resolution:
1. Press Concentration Resolution in the Options menu.
2. Select the resolution and press OK to confirm.
section 6.4.2 on page
section 6.4.3 on page
section 5.2 on page
On to highlight this feature.
enter the factor by which absorbance readings are to be
multiplied. Press the "Unit" key to select the units for
concentration measurements or to create a new unit.
89).
89).
section 6.1 on page 61
section 5.3 on
23.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents