Hach DR 5000 User Manual page 55

Enter the Version
1. Highlight the line containing Version and press Edit. Use the
alphanumeric keypad to enter the name indicated in the
working procedure.
2. Press OK to confirm.
Enter the Measurement Process
For detailed information on entering the measurement process, see
section 6.1.2 on page 72.
Check the working procedure in advance to determine whether this
point needs to be changed.
1. Highlight the Measurement Process line in the data overview
and press Edit.
2. Press Edit, select the sequence to be edited and press Delete.
3. Press New and use the alphanumeric keypad to enter the
process indicated in the working procedure.
Enter the Formula, Concentration Units, Designation,
Measuring Ranges
For detailed information on entering the Formula, see
on page 72.
Check the working procedure in advance to determine whether this
information needs to be changed.
1. Highlight the Formula line in the data overview and press Edit.
2. Select the formula, press Edit and use the alphanumeric
keypad to enter the data specified in the working procedure (for
C1=, C2=, units, name, measuring range limits, etc.).
Standard Operations
section 6.1.2
55