Recalling Stored Measurements - Hach POCKET COLORIMETER II Instruction Manual

2. Press
READ/ENTER
3. Use the
ZERO/SCROLL
accept and advance to the next digit. The time is entered in 24-hour format.

Recalling Stored Measurements

1. Press the
MENU
RCL. The instrument automatically stores the last 10 measurements.
2. In RCL, press
the most recent measurement taken. The meter stores the measurement
number as 01 (most recent) through 10 (oldest), the time the measurement was
taken, and the measurement value. The
of a specific measurement by number. The
stored data points.
. The digit to be edited will flash.
key to change the entry, then press
key, then press the
to recall the stored measurements, beginning with
READ/ENTER
Instrument Operation,
key until the display shows
ZERO/SCROLL
ZERO/SCROLL
READ/ENTER
2—5
continued
READ/ENTER
key allows for selection
key scrolls through all
to