Send Data From The Data Log - Hach DR 5000 User Manual

Standard Operations

5.3.1.3 Send data from the data log

36
4. The function Filter Settings is used to search for specific
items.
5. Highlight On to turn on the filters to select data by
• Sample ID
• Operator ID
• Start Date
• Parameter
or any combination of the four.
6. Press OK to confirm the selection. The chosen items are listed.
7. Press View Details to get more information.
Data is sent from the data log as CSV (Comma Separated Value)
files through a USB memory stick to a file named DATALOG. The
file can then be processed using a spreadsheet program. The file
name will be formatted as:
DLYear_Month_Day_Hour_Minute_Second. CSV.
To send data to a Printer, see
1. Plug in the USB device
2. Press Recall Data from the Main Menu. Press Options and
then the PC & Printer icon
3. Select the data to send to the memory stick and press OK.
Note: The number in parenthesis is the total number of data sets
assigned to this selection.
To send measurement data to a PC:
The optional HACH Data Trans software must be installed on the
PC, see section 5.2.6.3 on page
section 5.2.6.2 on page
(Figure 1 on page 14).
31.
31.