Administrator Mode And User Mode On Control Panel - NEC US110 User Manual

110 Using Advanced Features

Administrator Mode and User Mode on Control Panel

There are two access authority levels, administrator and user, in US110.
Administrator Mode
In this mode, you can access all the features of US110.
To switch to Administrator Mode from User Mode, open the control panel and press Ctrl + Shift +
F8.
Enter the administrator password in Enter Password dialog box.
NOTE:
and click [OK].
IMPORTANT:
that are connected with the same download server. By uploading the
settings information of File Upload, US110s can share the settings.
User Mode
The User Mode allows you to access features of US110 in the range allowed for general users.
The following items are limited by settings in "User Mode Settings".
Display of [Configure] tab in Terminal Connection Manager.
Number of icons to be displayed on Control Panel.
See "User Mode Settings" for details.
If no administrator password has been set, leave the box blank
The administrator password can be used to all US110s