Problems With Usb Device; Problems With Shutdown Settings - NEC US110 User Manual

Problems with USB Device

The keyboard and mouse are disabled at startup if a printer is connected to US110:
When the USB printer is connected to US110, the popup dialog prompting you to
→
specify device driver may appear at startup of US110. If the USB printer is
connected to the port that has higher priority than those for keyboard and mouse,
the keyboard and mouse are disabled.
Connect the keyboard and mouse to the ports having higher priority than the
printer according to the figure below. (In the figure, (1) shows highest priority, and
(5) shows the lowest priority.)
Front Panel
Rear Panel

Problems with Shutdown Settings

Wake On LAN feature is disabled:
If the power supply is interrupted while configuring Wake On LAN (e.g.,
→
removing the AC adapter or others), Wake on LAN feature is disabled. Restart
US110, then shutdown it to enter the Wake on LAN standby status.
Power consumption while Wake On LAN is in standby status is about 7 W.
(3)
(2)
(4)
(5) (1)
Maintenance 127