Chapter 3 Using Advanced Features; Logon To Terminal Connection Manager - NEC US110 User Manual

Chapter 3
Using Advanced Features
This chapter describes how to use advanced features of US110.

Logon to Terminal Connection Manager

After you turn on the US110, the Log-on to Terminal Connection Manager dialog box will open.
NOTE:
when your system administrator allows it. See "Log-on Settings" for
details.
Figure 3- 1 Log-on to Terminal Connection Manager
User name and password are assigned initially by the system administrator when the account is
established.
The password can be changed by the user (see "Change Password").
To create an account, see "File Upload" described earlier.
The user names are not case sensitive, however, passwords are case sensitive.
NOTES:
If you cannot successfully logon, ask your system administrator for
help.
Pressing the [F2] key on Logon dialog of Terminal Connection
Manager displays the Control Panel.
If automatic logon is available in RDP connection, the values
specified here (user name, password, and domain name) are used.
To use the domain name specified here at the next logon, put a
checkmark on "The domain name is preserved" in Log-on settings
to Terminal Connection Manager dialog.
Log-on to Terminal Connection Manager is required only