NEC US110 User Manual page 42

24 Using Features of US110
Connection Name, Type, and Status are displayed on the [Connections] page.
The Connections page has the following three command buttons.
Connect
Click [Connect] to connect with the selected entry.
NOTE:
available connection entries are defined by the system administrator for
each logon user. If you do not logon to Terminal Connection Manager,
the connection entry that was used in the previous connection is used. If
logon to Terminal Connection Manager is changed from [Enabled] to
[Disabled], the connection entry that was used in the previous
connection is used.
End
Click [End] to disconnect the selected entry.
Shutdown
Click [Shutdown] to open the Shutdown dialog box of terminal. Click [Yes] to shutdown
the US110. If you have logged onto the Terminal Connection Manager, click [Logoff] to
log off from the terminal. The [Logoff] button appears only when you have logged onto
Terminal Connection Manager.
Control Panel
Click [Control Panel] to open the Control Panel.
When logged on to Terminal Connection Manager, the