Installing 3.5-Inch Hard Disk Drive - NEC N8800-103F User Manual

8-6 System Upgrade

Installing 3.5-inch Hard Disk Drive

Follow the procedure below to install the hard disk. A hard disk may be installed in another slot in the
same procedure.
IMPORTANT:
Make sure to read "ANTI-STATIC MEASURES" and "PREPARING YOUR SYSTEM FOR
UPGRADE" before starting installing or removing options.
Start Windows Server 2003 after installing two hard disk drives that make up of disk dual
configuration.
1.
Shut down Windows Server 2003. The system turns off automatically.
2.
Remove the front bezel.
3.
Identify the slot to which you want to install the hard disk drive.
Install a hard disk in an empty slot in the group, starting from the lower slot. (In the order of slot
1, slot 2, and slot 3 in CPU/IO module 0 and 1)
4.
Pull the lever toward you while pushing the green
lock of the dummy tray to the left.
5.
Hold the handle of the dummy tray to remove the
tray.
IMPORTANT:
Keep and store the dummy tray with care.
TIPS:
The lever on the slot 3 may be hard to pull
toward you. This does not become a problem
for proper operation.
6.
Unlock the hard disk to be added.