Table of Contents
Advertisement
TIPS:
•
"Creating and Managing Configuration Files" on page 5-117
•
"Performing the Upgrade" on page 5-137
Saving a Configuration File
The Active Upgrade console automatically prompts you to save your configuration file if you leave
the Configuration section of the application, or exit the application. (To save the configuration file,
click Yes, otherwise click No or Cancel.)
You can also optionally click Save or Save As on the Upgrade Summary page, as described in the
following procedure.
To save the current configuration file
1.
Click Upgrade Summary in the navigation bar.
2.
On the Upgrade Summary page, do one of the following:
•
Click Save to save the configuration file with the file name and path name you previously
specified. Your file is saved.
•
Click Save As to save the configuration file with a new file name or path name. Continue
with step 3.
3.
In the Save Configuration File dialog box, specify a name for the new file. (When you save the
file, a .Config extension is automatically appended to the file name.)
4.
Next to Save in, select the directory in which to save the configuration file.
5.
Click Save to save the file. Your file is saved.
TIPS:
•
"Creating and Managing Configuration Files" on page 5-117
•
"Displaying the Upgrade Summary" on page 5-135
Selecting Disks to Upgrade
Use the Disk Selection page to select the disks that contain the software you want to upgrade with
Installing and Using Utilities 5-121
Advertisement
Table of Contents
Troubleshooting
