Table of Contents
Advertisement
5-84 Installing and Using Utilities
The settings above are disabled by default. Set them according to the operational mode of the server.
Operation at the time of newer version BIOS detection: You can set the actions for when a
module that contains a newer version BIOS than the one currently running is detected.
Update the BIOS on the working module: Updates the BIOS on the module currently running
to the one on the new module.
Display the updation status: Displays a window that shows the progress of the BIOS update.
Sound the beep when update failed: If updating the BIOS fails, the tool sounds beeps.
NOTE:
-
The dialog box may also be displayed when the system is temporarily degraded. In such
a case, it is automatically closed when the system status returns to the duplex state and
the FT STATUS LED illuminates green.
-
If you have mistakenly closed the dialog box, run the following program:
C:\ Program Files\NEC\HAS_SW\HASFTSTS\HASFTSTU.EXE
-
When the dialog box is still displayed after the FT STATUS LED illuminates green, press
the Alt + F4 keys together to close it.
-
The firmware update status dialog is temporarily closed by the changes on the user logon
status. If the automatic update of the firmware is started without a user logging on and
the progress window is displayed, the window closes when you try to log on during the
operation. After that when the firmware update process finishes, the progress window is
displayed again. Also, if a user logs off while updating the firmware, the progress screen
closes temporarily in the same way and is displayed again when updating the firmware
finishes.
Advertisement
Table of Contents
Troubleshooting
