NEC N8800-103F User Manual page 222

5-72 Installing and Using Utilities
Setup of Preventive Disk Maintenance
In this section, the preventive disk maintenance (S.M.A.R.T.) is configured.
If the preventive disk maintenance (S.M.A.R.T.) is enabled (by checking Enable on the setting
screen), the disk fault monitoring function is enabled to detect possible disk faults. Disabling the
preventive disk maintenance disables the disk fault monitoring function.
The table below shows the potential cases in which the setup of the preventive disk maintenance is
modified.
IMPORTANT:
The disk failure prediction (S.M.A.R.T.) feature is not supported in this server.
Use ft server utility to disable this feature.
Sample screen of ft server utility
[Preventive Disk Maintenance]