Table of Contents
Advertisement
Controller Configuration
The following screen is displayed when "Controller Configuration" is selected in the menu.
See the following table for each item.
Item
Runtime BIOS
BBS Support
POST
Banner
Display
Parameter
[Enabled]
Disabled
Disabled:Scan bus
[Device]
Controller
[Enabled]
Disabled
Description
Controls the BIOS status at the POST.
If [Enabled] is selected, the controller can be operated
as a boot device by SAS controller BIOS.
If [Disabled] is selected, other appropriate SAS
controllers operate as boot devices.
If the setting of BBS support is set to [Device], the
boot
device
connected
registered to the boot menu of system BIOS.
If BBS support is set to [Controller], only SAS
controllers are registered to the BIOS boot menu.
If [Enabled] is selected, Adaptec banner, the version,
and copyright are displayed.
If [Disabled] is selected, Adaptec banner, the version,
and copyright are not displayed.
System Configuration 4-37
to
SAS
controllers
is
Advertisement
Table of Contents
Troubleshooting
