NEC N8800-103F User Manual page 311

Upgrade State
Merge
Commit
Abort
The Operational State reports the status of the last operation that was requested. Table 5- 11
describes the possible operational states.
Table 5- 11. Status: Operational State
Operational State
Ready
Busy
Broken
The Partner State reports the status of the partner system. For example, while the system is in split
mode, the Active Upgrade console is running on the Production Side, and this field reports the
health of the Upgrade Side of the system. Table 5- 12 describes the possible partner states.
Table 5- 12. Status: Partner State
Partner State
DC On
DC Off
BIOS POST
Description
If the operational state is Ready, the system is merged. Otherwise, the
Active Upgrade console is in the process of merging the system.
The Active Upgrade console is in the process of committing your
changes (making them permanent).
The upgrade process has been aborted, and the Active Upgrade
console is in the process of restoring the system to its previous state.
Description
The previous operation has been completed successfully. The Active
Upgrade process is ready to enter the next upgrade state.
The current operation is still in progress. Allow time for the operation to
complete.
The Active Upgrade console could not complete the current operation.
Check the activity log for errors. You must correct the errors and click
Retry to complete the operation, or click Abort to abort the current
upgrade session.
Description
The partner system operating system is shut down, but the system still
has standby (housekeeping) power.
The partner system operating system is shut down and standby power
is off.
The partner system is performing a BIOS Power On Self Test
(POST).
Installing and Using Utilities 5-161