Viewing Active Upgrade Process Status - NEC N8800-103F User Manual

5-156 Installing and Using Utilities
The finish process should take only a few minutes. When the process completes, the upgrade state is
Fault Tolerant | Idle | Ready.
If the finish process fails the first time, you can click Retry to try again. If the problem persists, see
"Troubleshooting" for information about resolving the problem.
On the Finish page, upon successful completion of the Active Upgrade process, you can:
Click Exit to close the Active Upgrade console.
Click Save Log to save the activity log to a file.
Click Active Upgrade in the navigation bar to initiate another readiness test and upgrade with
the same configuration.
Click Configuration in the navigation bar to create, edit, or load another configuration file.
NOTE:
Though the Active Upgrade process is complete, your RDR disks continue to resynchronize in
the background. If you intend to initiate another upgrade process, you must wait for the
resynchronization to complete before you do so. See "Verifying If RDR Disks Are
Resynchronizing" on page 5-167 for more information.
TIPS:
"Viewing Active Upgrade Process Status" on page 5-156
"Verifying If RDR Disks Are Resynchronizing" on page 5-167
"Troubleshooting" on page 5-163

Viewing Active Upgrade Process Status

You can view the status of the Active Upgrade process at any point during the upgrade. The Active
Upgrade console indicates status in two ways:
"Activity Log" on page 5-157
"Status Bar" on page 5-159