Table of Contents
Advertisement
4-24 System Configuration
Monitoring Configuration
Select "Monitoring Configuration" on the Server menu and press Enter to display the following
screen.
Option
FRB-2 timer
PCI Enumeration
Monitoring
PCI Enumeration
Monitoring Timeout
Option ROM Scan
Monitoring
Option ROM Monitoring
Timeout
OS Boot Monitoring
OS Boot Monitoring
Timeout
POST Pause Monitoring
Parameter
Disabled
Select whether or not to enable the FRB-2 timer.
[Enabled]
Disabled
Select whether or not to enable the function to monitor
[Enabled]
PCI Device scan.
60-[180]-1200
Set the timeout for PCI Device scan. (unit: second)
Disabled
Select whether or not to enable the function to monitor
[Enabled]
the extended ROM scan.
60-[300]-1200
Set the timeout of the extended ROM scan. (unit:
second)
Disabled
Select whether or not to enable the function to monitor
[Enabled]
OS boot-up. If you are starting up from an OS with no
NEC ESMPRO Agent installed, disable this option. If
you use Disaster Recovery Option for ARCServe,
select [Disabled].
60-[600]-1200
Set the timeout at OS boot-up. (unit: second)
Disabled
Set whether or not to enable the POST monitoring
[Enabled]
function during boot pause. (unit: second)
Description
Advertisement
Table of Contents
Troubleshooting
