Safety Information - Beam Oceana 800 User Manual

Safety Information

IMPORTANT!
Please read the following information carefully
before installing and using the Oceana 800.
Failing to follow instructions may compromise the
safety of the product and may result in personal
injury and/or equipment damage. Please consult
your supplier if you have any further questions.
Refer to the appropriate section of this Oceana
800 Installation & User Manual for additional
safety information.
• Store the system in a cool and dry area.
• Do not submerge the system in water.
• Do not place foreign metal objects or debris
in the system. If debris enters into the system,
please return to the manufacturer for service.
WARNING
DO NOT open equipment. There are no user-
serviceable parts inside.
If a DC power supply is to be used, its output must
comply with the Safety Extra Low Voltage (SELV)
requirements of IEC60950.
All connectors must only be connected to equipment
ports which comply with the Safety Extra Low
Voltage (SELV) requirements of IEC60950.
POTENTIALLY EXPLOSIVE ATMOSPHERES
• Obey all signs and instructions.
• Sparks may occur during cable installation
and could cause an explosion or fire resulting
in bodily injury or even death.
BEAM Oceana 800 - Installation & User Manual
• Areas with a potentially explosive atmosphere
are often but not always clearly marked.
They include, but are not limited to:
» fuelling areas such as gasoline stations
» fuel or chemical transfer or storage
facilities;
» areas where fuel odors are present (for
example, if a gas/propane leak occurs in a
car or home);
» areas where the air contains chemicals
or particles, such as grain, dust, or
metal powders;
» any other area where you normally would
be advised to turn off your vehicle engine.
7